We carry it out ourselves. You lift nothing. We reply within 5 minutes.

Mixed renovation waste — no sorting needed

The most common case after a renovation: everything in one pile. The sorting is our job, not yours.

Reply in 5 minutes
Price before we start
Licensed disposal
Riga + region

Mixed construction waste in Riga

After a flat renovation the waste is rarely one material. Usually it is a pile of tiles with their mortar, wallpaper, pieces of plasterboard, skirting, polystyrene mouldings and empty filler bags. This is by far the most common case we deal with. You do not have to sort it — we collect the lot as it is, carry it out and separate it ourselves at disposal.

Sorting is not your job

We collect the waste exactly as it is. Separating it by material is our job, before disposal.

A price in the middle

Mixed waste weighs 400–700 kg per cubic metre — between concrete and wood. The exact figure comes from photos.

We collect loose waste too

If the waste is not bagged, we collect it. If it is, the job goes faster and the price is lower.

We separate out the hazardous items

We set aside paint, solvents and batteries and tell you where they go. They cannot travel in a general load.

How we work

1
You fill in the form

Fill in the request form and add a few photos. We will reply within 5 minutes.

2
The crew arrives

The crew arrives at a time you choose — often the same day or the next.

3
We agree the price

We work the price out from the photos and agree it with you. We only start once you have confirmed.

4
The job is done

We work cleanly and tidy up after ourselves.

Why mixed waste is the normal case

  • Reply to your request in 5 minutes
  • Licensed disposal
  • Carrying out and loading included
  • Price agreed before work starts
  • 12 years of experience
  • 4.8 out of 5 from customer reviews (600+ jobs)
Prices
Prices are indicative and include VAT. We agree the exact price with you before the work starts.
12
years experience
600+
jobs completed
4.8
customer rating
5
min response time

We take requests through the form

Add a few photos — we reply within 5 minutes with a price.

Book a collection

What is usually in mixed waste

In nine cases out of ten, the waste after a flat renovation is not one material but the whole list in a single pile.

The heavy part

Tiles, mortar, lumps of plaster, broken brick. Little room, but most of the total weight.

Finishing materials

Wallpaper, pieces of plasterboard, polystyrene mouldings, ceiling panels, old insulation. A lot of space, very little weight.

Timber parts

Skirting boards, fragments of door frames, old parquet blocks, battens.

Packaging

Empty mortar and filler bags, cardboard boxes, sheeting, insulation wrapping. A surprisingly large volume.

Odds and ends

Offcuts of cable, screws, old sockets, silicone tubes, brushes and rollers.

What must not be in there

Leftover paint, solvents, batteries. One tin of paint turns the whole load into hazardous waste — we sort those out and tell you where they go.

How to prepare so it costs less

None of this is required — do nothing and we will do all of it. But these steps genuinely cut the working time, and with it the price.

1

Bag it up if you can

Bagged waste is carried out far faster than waste tipped across the floor. For heavy waste, fill the bag only halfway — a full bag of mortar weighs 30 kg and splits.

2

Bring it together in one place

If the waste is gathered by the entrance or in one room rather than scattered through the flat, carrying it out is considerably faster.

3

Set aside what cannot go

Put tins of paint, solvents and batteries to one side. They cannot go in a general load, and we would sort them out anyway.

4

Clear the route

If the hallway and stairwell are clear and the truck can reach the entrance, the work runs smoothly. Park a long way off and every bag travels further.

Frequently asked questions

Do I have to sort the waste before you arrive?
No. We take mixed waste exactly as it is — the sorting is ours to do. The only thing we ask you to set aside is paint, solvents and batteries, because they cannot go into a general load.
Is waste already in bags cheaper?
In practice yes, because the work goes faster and takes less time. It is not required — if the waste is spread across the floor we collect it ourselves, the visit just takes longer.
What does a cubic metre of mixed waste weigh?
Usually 400–700 kg, depending on how much tile and mortar is in the pile. That variation is exactly why mixed waste is best priced from photos rather than from a description.

Need mixed renovation waste taken away in Riga?

Fill in the form and our specialist will get back to you shortly.

By submitting this form you agree to our privacy policy

See our other services

Concrete and brick rubble in the back of a truck

Concrete and brick removal

Heavy waste — the truck fills up by weight.

Find out more
Timber boards and metal pipes ready for loading

Wood and metal removal

We cut long material down on site.

Find out more
Workers carrying construction waste out of an apartment down the stairwell

Waste removal from apartments

Renovation waste from a flat — including from a top floor with no lift.

Find out more

Need mixed renovation waste taken away in Riga?

Fill in the form and we will reply within 5 minutes!

Book a collection
Book a collection